Bromsok
Cardone : 18B4890
Artikelnr: CDO184890
- Bleeder Port Size: M10x1.0
- Box Part Number: CL-2
- Box Part Number: WP-4
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- Canada VIO Count: 79904
- Canada VIO Count: 80056
- Cardone Pop Code: W
- E-Waste: No
- FAQs: A silicone grease is used on floating caliper mounting pins.
- FAQs: A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
- FAQs: As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
- FAQs: Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
- FAQs: Brakes squeal all of the time. What's causing the squeal?
- FAQs: Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
- FAQs: Car pulls to one side during braking. Why?
- FAQs: Could calipers be the cause of a low brake pedal?
- FAQs: Do all of your Calipers come with the new hardware and a mounting bracket for installation?
- FAQs: Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
- FAQs: New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
- FAQs: Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer's recommendations.
- FAQs: What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
- FAQs: What type of grease is used on floating caliper mounting pins?
- Features and Benefits: A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- Features and Benefits: As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Features and Benefits: Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
- Features and Benefits: Mounting bracket is included where applicable for a hassle-free installation.
- Features and Benefits: New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- Features and Benefits: New bleeder screws provide trouble-free bleeding and a positive seal.
- Features and Benefits: New stainless steel hardware clips and new mounting pins are included where applicable.
- Features and Benefits: New washers are included where applicable for a proper seal.
- Features and Benefits: Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Features and Benefits: Pistons are durable, resistant to cracking or pitting and handle great loads.
- Features and Benefits: Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Phenolic
- Piston Quantity: 2
- Piston Size (OD) (in): 2.206
- Piston Size (OD) (mm): 56.0324
- Product Condition: Remanufactured
- Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Qty To Pallet: 111
- Qty To Pallet: 48
CARDONE har renoverat Bromsok sedan 1970 vilket gör att deras väl beprövade renoveringsprocess garanterar ett pålitligt och driftsäkert Bromsok. CARDONES Bromsok tas fram för att möta eller överträffa OEM-produkten och göra monteringen snabb och enkel. Monteringstillbehör är inkluderade till applikationer där de behövs.
- 18-4890: Cardone
- 5093266AA: Dodge
- 5139910AB: Dodge
- CDO18-4890: Cardone
